membraPure Aquinity² - Model P10 - Ultra Pure Water System
From Water Purification System
Engineered for the production of ultra-pure water directly from tap water, the Aquinity² models specialize in generating ultra-pure water straight from the tap source. The Aquinity² P10 ultra-pure water system features a reverse osmosis (RO) module that directly delivers deionized water into an integrated 10L tank. Subsequently, Type I grade water is produced using a polisher cartridge. Available in different configurations (Reagent & Analytical), the Aquinity² water purification system caters to diverse requirements for ultra-pure water in various applications. The Analytical version includes a UV lamp for achieving low Total Organic Carbon (TOC) values, while Life Science grade water, with low endotoxin levels, can be produced using a special final filter. Additionally, an optional integrated TOC sensor enables continuous online monitoring of TOC content. Moreover, the Aquinity² can be configured as either a benchtop or a bench-integrated system.
Water Purification Directly from Tap Water
- Compact housing
- Big touchscreen
- Remote service module
- Menus and wizards easy to use and mistake avoiding
- Easy access for cartridge exchange
- Fixed and flexible dispenser
Main Technical Specifications of the System?
Resistivity/Conductivity
18.2 MOhm x cm | 0.055 µS/cm; Type I
Production rate
max. 8 L/h
Total Organic Carbon (TOC)
< 10 ppb (Reagent)
< 3 ppb (Analytical)
Features of Our Water Purification Systems
Perfect results with Water Purification Systems from membraPure
To deliver the best results for your analysis you need the highest water quality possible. With the “easy to operate” pure water and ultra pure water systems from membraPure you can select the model that cost efficiently produces laboratory-grade water. All our systems are Made in Germany.
Pure & Ultra Pure Water Purification Systems for all major lab applications
- Benchtop, wall mounted (with inclined display) and bench-integrated configurations
- Compact housing with small foot print
- Fast & easy cartridge replacement
- Easy-to-use software interface
- Intuitive software
- Up to 12 months trackable water quality values
- Integrated TOC monitoring
- Large touchscreen
- Flexible and lockable dispenser
Flowchart
The scheme shows an Aquinity P10 Analytical.
Options
Bench integrated configuration (BI version)
To save valuable benchtop space the system can be ordered as BI configuration. The system will be installed underneath the work bench and only the display and dispenser are mounted on the wall.
Wall mounted configuration
To save valuable benchtop space the system can be ordered as wall mounted configuration. the whole system can be mounted on the wall with inclined display.
IQ/OQ documents
Validation documents for water purification systems.
TOC-Monitoring (TI version)
The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continuously. The TOC value is measured between 1 and 999 ppb and can be shown in the display to monitor organic impurities.
Volumetric dispensing
Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising.
memTap
To be integrated into an ultra pure water system with a max, flow rate of 2 L/min. Point of use dispense arm with integrated control unit. Two joint to move it horizontally and vertically allowing to fill containers up to 55 cm height. Volumetric dosing of ultra pure water allows filling of containers without the attention of user, dosing eange 0.1 – 99 L, variable input and storage of values, after volume has been dispensed system goes back to standby.
Technical Specification
- ultrapure water quality: 0.055 µS/cm; Type I
- resistivity: 18.2 MegaOhm/cm
- total organic carbon (TOC): < 10 ppb reagent, < 3 ppb Analytical
- dispensing flow rate: 1.5 L/min
- production rate: 8 L/h*
- bacteria: < 1 cfu/mL
- particulate: > 0.2 µm less than 1 particulate/mL
- RNAse: < 1 pg/mL**
- DNAse: < 5 pg/mL**
- dimensions, weight, power: 504 x 340 x 535 mm, 16-20 kg, 110 - 230 V
*not possible to tap pure water **with microbiological final filter
Feed Water Requirements
- type of feed water: tap water
- feed water conductivity: < 1400 µS/cm
- inlet pressure: 1.5 to 6 bar
- free chlorine: < 0.1 mg/L
- Silt Density Inded (SDI): < 3
- pH: 3 to 9
- temperature: 5 to 25 °C
Customer reviews
No reviews were found for membraPure Aquinity² - Model P10 - Ultra Pure Water System. Be the first to review!