Water And Wastewater Equipment
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
-
ShowcaseManufactured by Labconco Corporationbased in USA
FlaskScrubber Glassware Washers are designed to wash and dry a wide variety of narrow-neck and general purpose labware. Utilizing a brilliant 5” touch screen display featuring CleanWorks OS, users have full control of wash parameters and washer settings. The included lower spindle rack consists of 36 spindles, and 18 glassware holders for narrow-neck glassware such as volumetric and ...
-
ShowcaseManufactured by Water Storage Tanks, Inc.based in USA
Oversized roofs on tanks are a common practice to achieve a more aesthetically appealing roof line with water tanks. Often times this is done to match the profile of masonry or a stone wall covering the exterior of tank or to match the roof line of an existing building or structure. CorGal roofs are regularly used on structures that do not hold water in order to create a visual architectural ...
-
ShowcaseManufactured by Innovation nilu ASbased in NORWAY
The NILU air sampling filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. We have both in-line filter holder and open-face filter holder. For both in-line and open-face air filter holder system it is possible to build several successive stages of filters for air sampling for the purpose of air pollution ...
-
ShowcaseManufactured by WESS GLOBAL, INC.based in SOUTH KOREA
ENV200-C clamp-on density measurement guarantees fit-and-forget and reliable measurement with every kind of measuring medium. Different from other density meters, its measurement isn't affected by pressure, corrosiveness, nor abrasiveness. As the clamp-on sensor can be mounted outside of pipe line even under flow-running condition, the user neither need to stop their process nor to consider the ...
-
ShowcaseManufactured by Eureka Water Probesbased in USA
The MantaPlus 25 comes standard with temperature, pH, conductivity, and a wipered turbidity sensor, and optional ORP and depth sensors. The M+25 features our refillable pH reference, which requires no expensive consumables. Connect the MantaPlus 25 to any of our field display options for sampling in the field, or add a battery pack for autonomous deployments. Connect to a telemetry station for ...
-
ShowcaseManufactured by Weedoo Greenboat Inc.based in USA
Package Includes: Belt Cover. Conveyor Permanently Mounted On DOT-Approved Trailer. 24V Portable Battery ...
-
ShowcaseManufactured by ForeverPure Corporationbased in USA
One metering injection system will be supplied for controlling different elements in the feed water of the RO plant. The metering pump will allow controlling of different functions such as the stroke length and percentage rate. The Chlorine Dosing System adds chlorine to feed water source, protecting the system from ...
-
ShowcaseManufactured by Texas Boom Company LLCbased in USA
Type I turbidity curtains (also commonly referred to as Type 1 and silt curtains) are intended to control sediment and runoff in calm waters. These turbidity curtains are built with foam-filled floats that are referred to as Freeboards, combined with skirts that typically range in height from 3 to 20 feet. These floating silt curtains impede the flow of silt or sediment that may be suspended in ...
-
ShowcaseManufactured by Respirometer Systems and Applications, LLC (RSA)based in USA
When operating in the aerobic mode, oxygen – from a supply of pure oxygen – is added in small increments into each respirometer vessel in response to oxygen uptake and carbon dioxide absorption. This mode of operation maintains a constant oxygen concentration in the headspace within the reaction vessel. Oxygen transfer from the headspace to the liquid phase is accomplished by using ...
-
ShowcaseManufactured by Proco Products, Inc.based in USA
Proco Style 233 expansion joints are built to withstand even the most rigorous piping system configurations. They are triple wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 233 expansion joints are appropriate for a wide variety of industrial applications, and are available in open arch ...
-
ShowcaseManufactured by Brentwood Industries, Inc.based in USA
A time-tested technology, trickling filters offer a simple, cost-effective, energy-efficient treatment solution. With more than 500 trickling filter installations worldwide, Brentwood’s media and components have been optimized to guarantee the best performance for any application. By maximizing surface area in a given volume, Brentwood’s structured-sheet media provides an ideal ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
ShowcaseManufactured by Jenfitch INC.based in USA
Jenfitch offers a wide variety of coagulants and flocculants for your water treatment needs. We have developed customized coagulants and flocculants to achieve optimum clarity and fast settling in your clarifiers. Our flocculent are effective in increasing particle density and enhancing water release during the dewater phase. Jenfitch can provide a simple and effective chemical program to improve ...
-
ShowcaseManufactured by MSE Filterpressen GmbHbased in GERMANY
Sludge dewatering in municipal or industrial waste water treatment is classified as complex. Not only the composition of the sludge, but also the economic and technical boundary conditions of the plant vary greatly. The optimal solution can only be reached by analysing the overall situation. Minimising dewatering costs while simultaneously reducing residue quantities are also clearly defined ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
ShowcaseManufactured by Harp Renewables Limitedbased in IRELAND
The Harp CX5 Hopper has a 1.5-tonne storage capacity. Download the spec sheet for full ...
-
ShowcaseManufactured by Enerpat Groupbased in CHINA
MSA-F Series Single Shaft Shredders are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughputs typically range between300kg/hr –5,000kg/hr+ depending on the model, material type and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you